Feuling

Feuling #4102 - Anti-Rotation Lifter Pins

Anti-Rotation Lifter Pins A max clearance of 0.002" - 0.003" between lifter and anti-rotation pin is recommended Excessive clearance will create excessive noise

Feuling #4100 - Anti-Rotation Lifter Pins

Anti-Rotation Lifter Pins A max clearance of 0.002" - 0.003" between lifter and anti-rotation pin is recommended Excessive clearance will create excessive noise

Feuling #4083 - HP+ Pushrods

HP+ One Piece Pushrods Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic...

Feuling #4082 - HP+ Pushrods

HP+ One Piece Pushrods Feuling highly recommends using one-piece pushrods instead of adjustable pushrods to maintain maximum cam/valve lift and reduce valvetrain harmonics and associated hydraulic...

Feuling #1237 - Gorilla Rocker Shaft and Bolt Kit

Gorilla Rocker Shafts and Bolt Kit Gas nitrided and final surface treated Kit includes the shafts and our ARP bolts Recommended for all Twin Cam engines and especially for engines running higher...

Feuling #1236 - Gorilla Rocker Shaft and Bolt Kit

Gorilla Rocker Shafts and Bolt Kit Gas nitrided and final surface treated Kit includes the shafts and our ARP bolts Recommended for all Twin Cam engines and especially for engines running higher...

Feuling #1235 - Gorilla Rocker Shafts

Gorilla Rocker Shafts Gas nitrided and final surface treated Over double the strength of factory rocker shafts Recommended for all Twin Cam engines and especially for engines running higher lift...

Feuling #1392 - Cam - 574 Series

Reaper 574 Cam Requires performance valve springs Performance lifters recommended but not required Will work with factory pushrods on engines with factory stack up If deck height, cylinders or...

Feuling #9011 - Gasket - Replacement/Pressure Relief PSI Testing Tool

Replacement Components for Pressure Relief Testing Tool Replacement parts for the Feuling­ Pressure Relief PSI Testing Tool (PART# 3801-0071) Made in the U.S.A.

Feuling #9009 - Air Regulator - Replacement/Pressure Relief PSI Testing Tool

Replacement Components for Pressure Relief Testing Tool Replacement parts for the Feuling­ Pressure Relief PSI Testing Tool (PART# 3801-0071) Made in the U.S.A.

Feuling #9006 - Relief Valve - Cam Plate Tool

M8 Oil Pump PSI Tester Includes air regulator, 0 - 100 PSI pressure gauge, plugs for water and oil cooled oil pumps, gasket and needed hardware Only fits Feuling™ oil pumps, will not work with...

Feuling #9004 - Bore Lifter - Gauge - No-Go™

Lifter Bore Measuring Kit Feuling recommends a lifter to lifter bore clearance of 0.001" - 0.0015" for optimum lifter performance Designed to accurately measure lifter bore diameter and bore...

Feuling #8990 - Engine Stand - M8

Milwaukee Eight Engine Stand Uses single factory engine mount bolt on front and 2 rear engine mount bolts to attach engine to frame Stand also features three holes for bench mounting Fits softail...

Feuling #9024 - Valve Guide Tool - 6 mm - M8

Valve Guide Tool Machine valve spring seats for proper installed spring height and spring cup fitment Cutter bodies and pilots are interchangeable Hardened pilots fit all 3/8 and hand drills For...

Feuling #9016 - Dial Indicator - Replacement

Dial Indicator Universal replacement dial indicator

Feuling #9014 - Crankshaft Runout Measuring Tool - M8

M8 Crankshaft Runout Measuring Tool The tool mounts to the cam chest side of the engine case using the designated mounting holes of the tool combined with the handled thumb screws and the case cam...

Feuling #9001 - Spring/Valve - Pressure Relief Tool - M8

Spring and Valve Remover For easy removal and installation of pressure relief spring, by-pass valve and roll pin Holds relief spring down and away from roll pin Made in the U.S.A.

Feuling #9023 - Valve Spring Seat Cutter - M8

Valve Spring Seat Cutter Machine valve spring seats for proper installed spring height and spring cup fitment Hardened pilots fit all 3/8" and 1/2" hand drills Cutter bodies and pilots are...

Feuling #9015 - Crankshaft Runout Measuring Tool - Twin Cam/EVO

Twin Cam/Evo Crankshaft Runout Measuring Tool The tool gives quick and accurate readings of the engines crank pinion shaft run out and makes for a great display to show and explain to customers the...

Feuling #9012 - Push Rod Tube Holder - Tool

Pushrod Tube Holder Tool Makes for easy adjustment of adjustable pushrods, holding pushrod tubes up and out of the way Made in the U.S.A.

Feuling #9008 - Cam Plate/Oil Pump Tool - Twin Cam/M8

Cam Plate/Oil Pump Tool Use this reamer to perform a valve job on the pressure relief valve seat of any Twin Cam engine cam plate and Milwaukee Eight oil pump psi relief valve bore To use, lightly...

Feuling #9010 - Cam Plate Tool - PSI Relief Valve - Twin Cam

Cam Plate Tool Bench test cam plate before installation, cycle the pressure relief valve, testing operation and assuring the valve moves freely, seats and seals each time, any leakage at the relief...

Feuling #9000 - Spring/Valve - Pressure Relief Tool

Spring and Valve Remover For easy removal and installation of pressure relief spring, by-pass valve and roll pin Holds relief spring down and away from roll pin Made in the U.S.A.

Feuling #1231 - Rocker Shafts - Set - M8

Gorilla Rocker Shaft and Stud Kit Custom tooling was created to provide a countersink relief for the bolt/nut head versus machining away the entire end of the shaft per the factory design ...