Oil Pumps & Cam Plates

Feuling #8000 - Camplate - Gear Drive - Twin Cam

High Flow Camplates Camplate matches the oil portholes throughout the camplate to the port holes in the engine case increasing engine oil flow throughout the engine Camplates are pressure tested and pressure relief valve is seated, sealed and set to...

Feuling #8004 - Pressure Relief Valve - M8 uses Factory or Fueling oil pumps

Pressure Relief Valve Cam plate pressure relief valve plunger is precision-machined and heat-treated steel Fits all Twin Cam cam plates including factory, Screamin' Eagle, Feuling and others (will also work with M-Eight oil pumps) Made in the U.S.A. ...

Feuling #8016 - Block Off Cam Plate - Big Twin

Block Off Plates Block off hydraulic chain tensioner holes when using gear-driven cams Made in the U.S.A.

Feuling #8017 - HiFlow Camplate - M8

Cam Support Plate Increase engine oil flow and volume by enlarging the oil pump reservoirs and critical oil passages including the scavenging return holes from the pump to the camplate and into the engine case Camplate matches the oil port holes on the...

Feuling #8027 - Pressure Relief Spring - M8 - 6 Pack

Pressure Relief Valve Cam plate pressure relief valve plunger is precision-machined and heat-treated steel Fits all Twin Cam cam plates including factory, Screamin' Eagle, Feuling and others (will also work with M-Eight oil pumps) Made in the U.S.A. ...

Feuling #8037 - Camplate - OE+ - M8

OE+ Camplates for Milwaukee Eight FEULING OE+ stock replacement billet cam plates are manufactured from 6061 aluminum, providing increased rigidity and machined to FEULING's high tolerance standards Direct bolt-in replacement and accept the factory or...

Koso MO623100 - Banjo Bolt Kit - Big Bore - Grom

Optional camshaft kit can be used with stock engine, but delivers improved results when used with 170cc Big Bore kit Banjo bolt kit designed for 170cc big bore kit Includes ceramic coated cylinder, 61mm forged piston, rings, pin, gasket kit and banjo...

Koso NF623000 - Hi Flow Oil Pump - Grom

Increases the oil flow by 40%, helping to prevent engine failure Keeps the engine lubricated to optimize performance Recommended for bikes with upgraded engines using the Koso North America 170cc Big Bore kit and 4V cylinder head (sold separately)

Oil Pump Assembly - Big Twin

FeaturesFilter your oil before it enters your motorComplete with fittings that send oil to the filter before pumping it through your engineAllows the use of 10-micron oil filters for additional protectionMachined from 6061 T-6 aluminum billet and...

Oil Pump Assembly - Big Twin - 60869

FeaturesFilter your oil before it enters your motorComplete with fittings that send oil to the filter before pumping it through your engineAllows the use of 10-micron oil filters for additional protectionMachined from 6061 T-6 aluminum billet and...

Oil Pump Big Twin

Features Constructed of high-quality billet aluminum with a polished finish Unique three-valve system delivers 8-10 lb. of oil pressure to the crankshaft at idle (all other oil pumps have a pressure valve that closes at idle, denying the crankshaft...

Oil Pump Big Twin - 176925

Features Constructed of high-quality billet aluminum with a polished finish Unique three-valve system delivers 8-10 lb. of oil pressure to the crankshaft at idle (all other oil pumps have a pressure valve that closes at idle, denying the crankshaft...

Oil Pump Bushing 24641-36

FeaturesMade in the U.S.A.Specs Product Name: Drive Shaft Riding Style: Street Type: Oil Pump Units: EachApproximate Package Weight & Dimensions Weight: 0.1 Height: 0.86 Length: 3.7 Width: 2.04Fitments Years Make Model 2000 Harley-Davidson FXR 4 ...

Oil Pump Drive Gear

FeaturesMade in the U.S.A.Specs Units: Each Type: Oil Pump Product Name: Drive Gear Riding Style: StreetApproximate Package Weight & Dimensions Weight: 0.1 Height: 0.74 Length: 3.93 Width: 3.54Fitments Years Make Model 1985 - 1989 Harley-Davidson...

Oil Pump Drive Gear - 60842

FeaturesMade in the U.S.A.Specs Product Name: Drive Gear Type: Oil Pump Units: Each Riding Style: StreetApproximate Package Weight & Dimensions Weight: 0.1 Height: 0.74 Length: 1.37 Width: 1.37Fitments Years Make Model 1965 - 1972 Harley-Davidson...

Oil Pump Plunger - 26400-82

FeaturesMade in the U.S.A.Specs Type: Oil Pump Type: Relief Product Name: Plunger Riding Style: Street Units: EachApproximate Package Weight & Dimensions Weight: 0.1 Height: 0.47 Length: 3.03 Width: 1.92Fitments Years Make Model 1982 - 1993...

Pingel 62169 - Oil Pump Screens - Twin Cam

FeaturesDesigned to protect the oil pump and cam plate from debris off the chain-tensioners or other particles that may come loose in a Twin Cam engineGreat to put in when doing a cam bearing jobKeeps cam bearing rollers from dropping into the center...

S&S Cycle #31-6200 - Billet Oil Pump - Standard Cover

Billet Oil Pump Kit Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve...

S&S Cycle #31-6205 - Oil Pump - Universal Cover

Billet Oil Pump Kit Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve...

S&S Cycle #31-6295 - Oil Pump with Gears - Universal Cover - Big Twin

Billet Oil Pump Kit Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve...

S&S Cycle #31-6296 - Oil Pump with Gears - Standard Cover - Big Twin

Billet Oil Pump Kit Kit includes oil pump, universal cover with top and bottom feeds, mounting bolts, supply and return gears, drive shaft with keys and snap rings, check ball and spring, pressure relief valve and spring, check ball and release valve...

S&S Cycle #310-0546 - Oil Pump Screen - Twin Cam

Oil Pump Screen OEM replacement parts for S&S Oil Pump

S&S Cycle #310-0641 - TC3 Oil Pump - Twin Cam

TC3 Oil Pump Three stages for consistent pressure and reliable scavenging Separate scavenge sections for flywheel cavity and cam chest (no interface) Screens and magnetic traps help protect the scavenge rotors from debris Special design allows S&S...

S&S Cycle #310-0731 - Oil Pump with Cam Plate

TC3 Oil Pump and Cam Support Plate Kit Precision CNC machined forged aluminum Increased structural strength Dimensional stability Freedom for internal porosity Separate scavenge sections for flywheel cavity and cam chest scavenge each area more...