Andrews

Andrews #217485 - Cam - Bolt-In - 485 - M8

485 Bolt-In Cam Highest lift bolt-in chain drive cam available for use with stock valve springs Bolt-in cam for 107” engines and larger Excellent low to mid rpm power (1500 - 5600+ rpm) Cam Specs...

Andrews #217465 - Cam - Bolt-In - 465B - M8

465B Cam Bolt-in chain drive cam for 107”-117” engines Use with stock valve springs For heavy and middle weight bikes Great low to mid rpm torque (1200-5600 rpm) Made in the USA Cam Specs are...

Andrews #290334 - Belt Pulley - 33-Tooth - '94-'06

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper...

Andrews #290330 - Belt Pulley - 33-Tooth - '85-'93

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper...

Andrews #290326 - Belt Pulley - 32-Tooth - '07-'17

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper...

Andrews #290306 - Belt Pulley - 30-Tooth - '07-'17

Belt Drive Transmission Pulley Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper...

Andrews #237240 - Ignition Coil - 2.8 Ohm - Harley Davidson - Red

Supervolt 12 V Ignition Coil The original Andrews ignition coil adds great performance with a classic look Replacement coils deliver 30,000+ volts Produce more voltage than a stock coil Made in...

Andrews #298190 - N8 Cam - XL

N8 Grind Cams Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.

Andrews #298170 - N6 Cam - XL

N6 Grind Cams Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A. N6 designed for...

Andrews #298150 - N4 Grind Cam - XL

N4 Grind Cams Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.

Andrews #298130 - N2 Grind Cam - XL

N2 Grind Cams Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.

Andrews #292088 - Chromoly Pushrods - Twin Cam

EZ-Install Pushrods EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or doing maintenance Made in the U.S.A.

Andrews #292188 - Aluminum Pushrods - Twin Cam

EZ-Install Pushrods EZ-install pushrods eliminate the need to disassemble your rocker boxes or remove the gas tank when changing cams or doing maintenance Made in the U.S.A.

Andrews #290304 - Pulley - 30 Tooth

Belt Drive Transmission Pulleys Machined from heat-treated, gear-quality steel Made in the U.S.A. May require some elongation of axle hole in swingarm or change in belt length to allow for proper...

Andrews #298145 - N4 Grind Cam - XL

N4 Grind Cams Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.

Andrews #298125 - N2 Grind Cam - XL

N2 Grind Cams Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A.

Andrews #298165 - N6 Cam - XL

N6 Grind Cams Cams run to 6500 rpm with stock hydraulic lifters; recommend solids not be installed Stock base circle sizes allow the use of stock pushrods Made in the U.S.A. N6 designed for...

Andrews #292025 - Pushrod Kit - XL

Pushrod Kit Super-light, heavy-duty fixed-length pushrods Sold in sets of four to replace OE; two shorter rods for intake, two longer rods for exhaust Rocker boxes must be removed for installation...

Andrews #214055 - Cams - PB+ - XL

PB+ Cams Bolt-in four-cam set More horsepower and torque Stock springs OK to 7000 rpm, requires no headwork Made in the U.S.A. Installer must check coil bind, valve-to-valve clearance,...

Andrews #214050 - Cams - PB+ - XL

PB+ Cams Bolt-in four-cam set More horsepower and torque Stock springs OK to 7000 rpm, requires no headwork Made in the U.S.A. Installer must check coil bind, valve-to-valve clearance,...

Andrews #214045 - Cams - PB+ - XL

PB+ Cams Bolt-in four-cam set More horsepower and torque Stock springs OK to 7000 rpm, requires no headwork Made in the U.S.A. Installer must check coil bind, valve-to-valve clearance,...

Andrews #253050 - Mainshaft - 3rd Gear

4-Speed Mainshaft Component Sold individually, unless noted.

Andrews #294150 - High-Lift Springs

High-Lift Valve Spring Kit Accommodates cam lifts of .550"+ Installation does not require machining of heads Kit includes four inner and four outer springs For use with titanium upper-spring...

Andrews #296220 - Countershaft Gear - 2nd/3rd Gear

5-Speed Countershaft Component Sold individually, unless noted