WEGO IIID dual channel wide-band exhaust gas oxygen sensor interface upgrade kit PART #1022-0224 will log engine data along with the actual air/fuel ratio (AFR); logged AFR data can be analyzed and displayed.
Enables or disables settings in the ECM such as ACR (automatic compression release for performing engine compression testing), EITMS, cruise control, and active exhaust, reads and sets engine idle speed rpm
Enables or disables settings in the BCM for ignition switch, new radio installation, bank angle sensor for trike installs, program fog light function, ABS installation, and enable service state
Activates modules, lights, indicators fuel pump drain and electronic throttle sweep; tests different actuators, light and indicators
Includes two analog inputs with 0-20V or +_ 200V range as well as two channel oscilloscope capability for waveform display
Data logging automatically triggered when a trouble code is set and shows the data before and after code is set
Real-time display of engine sensors along with built-in data logging will store data for up to one hour
Latest software will include the latest firmware for easy remote updating of the Twin Scan 4
Communicates with ECM, TSSM and BCM to read, then clear diagnostic trouble codes
Requires use of a PC with Windows 7, Windows 8 or Windows 10 for display
Programs and reads key fobs, programs PIN and disables security
Calibrate speedometer, remove new speedometer display of VinErr
Analog inputs can also be used for air/flow ratio (AFR)
