Braille 1236L - Lithium 12 Volt 6 Amp Charger/Maintainer

Product Description

Braille 12v 6a lithium charger/maintainer charges at a reasonably quick 6 amps and is designed to maintain & keep Braille lithium batteries fully charged when not in use or sitting for long periods of time.  In the case that a Braille lithium battery is every fully discharged (10 volts is considered 0% state of charge on a 12v lithium battery), this charger does have a "pre-charge/revival mode" that will do a slow "pulse charge" as long as the battery has at least 2 volts (to know that it is connected to a battery) and will slowly bring it back up to 10 volts before charging at the standard 6 amp rate back up to full.  This updated charger now comes with an SAE quick disconnect end along with a ring terminal harness and standard battery clamps for more charging solutions in a variety of vehicles, bikes, etc.  (Power cord included, but not pictured) Replacement glass fuse: F10AL250V   Model: 1236L DC Output DC output voltage, nominal: 14.2V DC output current, maximum: 6A Output fuse:  F10AL250V or T10AL250V (5 x 20 mm) Automatic multi-rate charging, CC/CV profile with Pre-charge @1.8a. (between 2v-10v) Efficiency, 98% AC Input AC input voltage range: 90-243VAC AC input voltage-nominal: 110VAC/220VAC AC input frequency: 50-60Hz Mechanical Dimensions: 4.45” x 2.36” x 3.39” (113 x 60 x 86mm) Net weight: 2.0lbs (.907kg) Operating Temperature: 14F-113F (-10C-45C) Storage Temperature: -40F-158F (-40C-70C) Fan Operating Temperature: 104F (40c) AC input: US plug, Europlug, EIC320/C13 connector, 1.5 meter DC output: Colored Alligator clips & ring terminal harness both with SAE quick connector, 1.5 meter Regulatory Safety standard: CE listed, NRTL, UL compliant Safety-Europe: EN60335-2-29:2002 Packing List 1x charger; 1x user manual; 2x AC power cord (110VAC, 220VAC)