Product Description
Part Number:RPKT-200HR13
- Amplifier Output Power:200w RMS total (100w x 2) into 2-ohms at 14.4vdc
- Amplifier Class:Class D properly shielded against FM interference
- External Dimensions:6 ½ x 4 ¾ x 1 ¾
- Speaker Size:6.58” (in.) Diameter
- Cone Construction:Black Glass-Fiber
- Tweeter Type:PEI Dome High-Output
- Frequency Response:35-23kHz
- Sensitivity:91 db
- Magnet Material:Lightweight Neodymium
- Impedance:2 Ohms
- Maximum Power:200 Watts
- RMS Power:130 Watts
- Mounting Depth:2 1/4” (in.)
- Weather Resistant:Yes
- OEM Size Match:Yes
- Comparision Rating:ROKKER speakers and amplifiers provide the most significant increase in volume and overall fidelity compared to stock Harley and/or Fosgate.
This complete custom speaker/amp installation kit has been designed for the 1998-2013 Harley® RoadGlide or RoadGlide Ultra fairing.
ROKKER speakers are spec'd at 2 ohms impedance and 200 watts maximum input (130w RMS - 91db sensitivity), these speakers provide excellent on-highway performance. (for 1998-2005 RoadGlide fairing J&M speaker adapter plate kit # RRPA-RGSPA also recommended.)
Speaker drivers feature lightweight waterproof woven-fiber cones with super-rigid metal basket and a high-density lite-weight Neodymium magnet structure with integral high-output PEI tweeters.
Top-quality speaker grills, adapter rings and bracket hardware are included for secure and clean mounting into the 98-13 Harley RoadGlide fairing.
Mounting hole pattern and spade electrical connections are exactly the same as the factory specification, this is a total plug-and-play no-modification solution complete with easy to follow installation instructions.
The new ROKKER 2-channel 200w amplifier has been design specifically for use in the 1998-2013 Harley® RoadGlide fairing with the Harley HK Radio, Harley RSI radio and Jensen, Aquatics or Fosgate replacement HD radios with direct RCA-RCA connections.
This is a full range class D amplifier and is spec’d at 100watts RMS per channel X2 channels, (200w total) driven continuous into a 2 ohm load @ 14.4vdc.
Amplifier mounts to the custom made L-bracket system, manufactured specifically for the RoadGlide fairing.
Custom made plug-n-play wiring harnesses/RCA-RCA direct cable adapters are included with this complete audio kit, top quality heavy gauge power/ground wires are used for the fused battery connection, along with all necessary mounting hardware & complete installation/operation instructions.
Amplifier itself measures 6 1/2” X 4 ¾“ X 1 ¾”.
