Product Description
Add Huge Ported Bass to Your Harley Saddlebags
Now anyone can go really big without having to rebuild their bags, permanently seal their lids, or repaint their bags. This kit has twin integrated side-to-side supports that virtually eliminate opposing forces inside the saddlebag, making the bag a robust and rigid enclosure. The kit is made entirely of American Made CNC machined parts cut from solid polymers. The outside wall of the bags are braced by twin ½” thick anchors that get bonded into place so that it is not necessary to drill any holes in the outside facing wall of the bag. This kit has a 10 business day build time before shipingThis Kit Is Designed to Be Installed Without Any Skilled Fabrication
We have already done all of the fabrication and design for you. This kit comes with simple templates for cutting out the grill and port holes. A basic router and jigsaw are all that is needed for a complete installation.One of the Best Aspects of This Kit
is that it allows you to use the entire volume of your bag. Sealing off the bottom section of the bag robs you of precious air space. The more air space you retain, the lower your tuning frequency can be.DB Drive Euphoria Expert Carbon Fiber
series mid-bass woofers, tuned ported woofer mounts for the bags, stainless steel adjustable side-to-side braces, twin ½” thick anchor points, ¾” machined MDF router templates, all stainless steel mounting hardware, and powder-coated stamped steel speaker grills. The port is removable so that its length can be adjusted.Laser Perfect
Every American Hard Bag woofer kit comes with a specialized router bit and router templates that make a laser-perfect opening for the speaker grills and ensures perfect alignment in the bags every time. Your standards should be higher than the norm. American Hard Bag delivers that high standard.Fitment
- 2014 & later factory bags and most all aftermarket bags.
- Will not work with 2013 and earlier bags because of the bag width.
- Perfect for Road Kings because this kit leaves room for amplifiers in the bags and also allows the lids to open for access and service.
- If lid speakers are used they should have American Hard Bag 6x9 enclosures installed over them.
Warranty
- 5 Year Limited
Features
- No Skilled Fabrication Required
- No Need to Repaint Bags
- No Need to Fiberglass
- No Need to Seal Lids
- Lids Still Open!
- Take Advantage of 100% of Bag Air Volume for Lower Tuning Frequency
- Install Woofer Amp in Saddlebag
- Extensive Bag Bracing for Increased Output
Specifications
T/S PARAMETERS- Resonant Frequency (fs) 41Hz
- D.C. Voice Coil Resistance (Re) 3Ω
- Mechanical Quality Factor (Qms) 5.49
- Electrical Quality Factor (Qes) 0.88
- Total Quality Factor (Qts) 0.76
- Compliance Equivalent Volume (Vas) 14.1L
- Mechanical Compliance (Cms) 0.09mm/N
- Efficiency (1W/1M) 92 dB
- Nominal Impedance 3Ω
- Power Handling 800 Watts
- Dynamic Wattage 1600 Watts
- Sensitivity (1w/1m) 92 dB
- Voice Coil Diameter 3″ (76.2mm)
- Mounting Depth: 4.68” / 119 mm
- Cutout Diameter: 9.26” / 235.32 mm
What's Included
- Uphoria Expert EX10NMB-CFXL
- American Hard Bag BA10P Ported 10" Woofer Mounting Kit with Side Brace
- CNC Machined Templates
- 1/2" Flush Trim Router Bit
- 5/16" Stainless Steel Allen Button-Head Bag Mounting Bolts
- Stamped Steel Powder Coated Speaker Grill
- All Stainless Steel Hardware
- Gaskets
What's Not Included
- Amplifier
- Wire harnesses
- Sold as a single left or right side unit unless the twin woofer kit is selected before adding to cart